Email E-mail  sitemap Map

        Manufacturing has a long history .Expanded Metal Made in China .Streckgitter factory of the world.

    Home Profile Overview Application Index Specifications Contact
   Home :: Index :: Samples Providing and Tests
          Products Catalog
  Anodized Aluminum Expanded Metal Cladding Panels
  Expanded Steel Mesh, Hot Dip Galvanized
  Hexagonal Expanded Metal
  Expanded Steel Grating Sheet
  Fine Expanded Titanium mesh
  Expanded Galvanized Metal Mesh Machine
  Expanded Metal Grain Screen
  Galvanized Expanded Metal Mesh for Poultry Fencing Net
  Malla Expanded and Flattened
  Metal Deploye Extended
  Rhombic Shaped Expanded Mesh
  Expanded Diamond Mesh
  Decorative Expanded Metal Mesh
  Security Expanded Metal Fence
  Stamping Metal Mesh
  Industrial Expanded Metal Mesh
  Expanded Metal For Building
  Expanded Metal Lath Coils
  Expanded Metal Gratings
  Flattened Expanded Metal
  Expanded Metal Gates
Opening Patterns Available
Surface Treatment
Expanded Metal FAQ
Mini-Mesh Expanded Metal Foils
Expanded Metal Shielding
Flat Expanded Metal Sizes
Expanded Metal Stair Treads
Expanded Metal Drain Covers
  Expanded Metal Grid
Expanded Metal Floor Plates
Aluminum Expanded Metal
Carbon Steel Expanded Metal
Stainless Steel Expanded Metal
Expanded Metal Machine
    Contact Streckgitter

Expanded Metal Sheet Factory

Tel: +86-534-689187
Fax: +86-534-689189
For a specific requirement, send us a request




  Expanded Metal Lath Cladding Panels Samples and Testing


Our Scope of Works

Expanded Metal Mesh can be processed into architectural mesh designs including:
a) External wall cladding. b) Internal wall cladding. c) Roof cladding.

Detailed Design of all interfaces with adjoining trades shall be arranged prior to commencement of manufacture.

Expanded Metal Cladding Panels:
Framed expanded metal lath cladding panels to internal and external walls.
Framed expanded metal lath cladding panels to roof areas.

We offer this type of cladding panels in attending tenders or export direclty.

When we submit a tender, our tender design response shall include:
i) Samples where specified. ii) List of Tests included.
iii) QA/QC programme.
iv) List of proposed Working Drawings.
v) Summary of deviations from the Specification.
vi) Outline technical specifications reflecting proposed materials/systems. vii) A list of proposed suppliers and sub-contractors intended to be used.
Samples, Mock-ups, Prototypes and Quality Benchmarks

Expanded Metal Cladding Panels are offered with products Samples before or Shipment:
a) Samples of each type of expanded metal lath 500mm x 500mm minimum size with specified finishes.
b) Samples of each type of framing 500mm in length with specified finishes.
c) Sample of miniature panels incorporating expanded metal lath welded into frame to demonstrate manufacturing quality.
d) Samples of support system and fixings.

Prototype to include triangular and rectangular mesh cladding, stainless steel cladding of footing and metal panels at junction to recessed cladding.

Expanded metal cladding of truss at G.a and s.18 at 3rd floor level. Nominal width 6m wide by 6m high.

Prototype to include triangular and rectangular mesh cladding, junctions to Sierpinski prop and metal panel wall cladding of cantilevered wall behind.

Off-Site testing of The Expanded Metal Wall and Roof Cladding Sheets:
a) The Contractor may provide data from previous independently certified tests to demonstrate
that the Contractor's proposed systems meet the performance requirements of the Specification. The information shall be to the entire satisfaction of the Client’s Representative.
b) If suitable data to demonstrate compliance with the performance requirements is not available, provide prototypes of each type and have them independently tested in accordance with the testing criteria indicated in the Specification.
c) Independently certified test data, as applicable, shall include static and dynamic results, and
Agrément certificates.

Test Requirements for the Expanded Metal Cladding Panels:
Include for testing by an accredited independent testing specialist or provide independently certified test data to demonstrate compliance with the Specification for the following:
a) Movement testing.
b) Load testing.
c) Deflection testing.
d) Wind loads.
e) Thermal movement.
f) Moisture movement.
g) Solar performance.
h) Fire.


Copyright © Streckgitter Expanded Metal Sheet Factory

E-mail:      Url: